How to dry the building after flooding?

A flooded building is a huge problem for its owner. Flooding, failures in sewage or flooding the house with a neighbor - situations that require drainage of all premises. This task is complex and requires the use of specialized equipment, so it is usually entrusted to professionals. How to effectively drain the flooded building? What to do after flooding the building? The owner of a flooded building can try to drain it on his own. To do this, when flooding with hot summer, it is necessary to open all windows and doors and constantly ventilate the rooms. You can also turn on the heating. However, our climate, which is not one of the warmest, does not contribute to the rapid drying of the building.
The process of natural drying can take up to several months. In addition, the costs arising in connection with a constantly working heating will be huge. That is why it is worth drying out a specialized company that has appropriate equipment and can use effective methods. Surgery based on moisture adsorption
This method, well known for many years, is effective and environmentally friendly. To drain the building, devices called moisture absorptions that have a sorbing agent are used. The agent can be hygroscopic material, such as, for example, lithium chloride, or silica gel. The action of these devices is based on the fact that they remove moisture outside the building, and at the same time surround its elements from the inside with dry air. Such drainers are effective even when the entire process is carried out in winter and the temperature on the street is low. Condocent drying
Devices that drain the buildings in this way are absorbed into the evaporator, wet air. There, its temperature drops to the level of the dew point. As a result, its condensation occurs. Water is collected in a special reservoir that requires emptying. So that condensation drainage has the desired effect, the building must be specially prepared. The premises must be carefully sealed to prevent outdoor air. All ventilation grilles, cracks in the windows and doors should be sealed.
Microwave drying is carried out using microwave emitters, which, driving water molecules, make them rub against each other. Then the particles heat up to high temperature and evaporate. This method works well in flooded buildings, as well as in very raw. Electrophysical drying
With such drying, direct current is used. It takes place in electrodes located in the walls of the drainable building. Then the process of electro -osmos occurs. Water from wet walls and ceilings goes down from the top of the building. Then it is removed outside the room.